|
COMPANY PROFILE
We introduce our self as manufacture of Wall Putty Brand Name as Silver Wall Putty since last 10 years. We are manufacture at our workshop by highly qualified skill MAIN IN PRODUCT FEATURES :
Quality Excellent
Reasonable Price
Punctually in an appointments & correspondence & service. A customer satisfaction is our motto.
We well give some Information About Our Wall Putty
Silver Wall Putty
White cement based putty for luxurious and silky interior/exterior finish of your dream home
Silver Wall Putty is White Cement based putty for cement plastered walls and ceilings. Silver Wall Putty is used to fill the uneven surfaces of cement plastered walls and concrete walls. Application of Silver Wall Putty provides smooth and strong finish to the walls for further application of all kinds of paints. The smooth finish gives better look to interiors and exteriors.
Surface Preparation
The surface should be cleaned to make it free from dirt, dust, grease, oil and paint. All foreign impurities should be removed with a wire-brush. Wall surfaces should be cured so that the surface is saturated with water yet in ‘touch dry’ condition.
Treatment of New Surface
The new surface requires only soft treatment such as removal of dust, dirt and foreign matter. In case of cracks, voids and damages; it should be patched up prior to application of Silver Wall Putty with gray/white cement.
Treatment of Old Surface
All loose material and/ or organic growth must be removed with Putty blade or brush. In case of old painted surface scrub the surface with coarse emery stone/paper.
Preparation of Silver Wall Putty Paste
Silver Wall Putty is a fine powder. Mix slowly Silver Wall Putty with approx. 40% water by volume to prepare paste of desired consistency. Mix vigorously for 5-10 minutes for making lump free, uniform and smooth putty paste. Product should be mixed in required quantities to be used within 2-3 hrs of its preparation.
Application
Apply uniformly the first coat of Silver Wall Putty with blade/trowel on the wall from bottom to top. Apply second coat after the first coat has dried completely. Limit the total thickness of 2 coats to 1.5 mm. Allow complete drying and then use fine emery paper to remove the application mark if any. Any kind of paint can be applied on this surface. Use water for curing before applying paint.
dust inhalation while handling the powder putty.
|
Comparison Between Silver Wall Putty and Traditional Putty
|
|
Properties
|
Silver Wall Putty
|
Traditional Putty
|
|
|
|
Silver Wall Putty is white cement based putty. Hence it possesses good binding property.
|
|
|
Due to low cost material, it has very less binding property.
|
|
|
|
|
Due to its cement base, Silver Wall Putty becomes an integral part of plaster and hence more durable.
|
|
|
|
|
|
Silver Wall Putty covers more surface area exceeding 20 Sq. ft./kg. In 2 coats on a new plastered wall.
|
|
|
Covers less surface area.
|
|
|
|
|
Silver Wall Putty resists dampness.
|
|
|
Does not resist dampness.
|
|
|
|
|
|
Flaking occurs when it comes in contact with water.
|
|
|
|
|
Silver Wall Putty requires less paint due to low
absorption.
|
|
|
Requires more paint due to high absorption.
|
|
|
|
|
No primer coat is required.
|
|
|
|
|
|
Better appearance due to very high whiteness of Putty. NCCBM certifies 93% whiteness.
|
|
|
|
|
|
Less pigment consumption yet bright colours.
|
|
|
High pigmentation. Consumption yet dull colours.
|
|
|
|
|
|
